The corn harvester installed by the tractor is very popular among farmers. It is multi-purpose, light and flexible, and frees people from heavy labor. It has high work efficiency, saves users' manpower and material resources, and brings great convenience to users. The Tractor Mounted Corn Harvester manufacturer introduces the precautions for the use of the harvester to ensure the safety of the operator.
Tractor Mounted Corn Harvester operation:
1. The corn harvester should enter the ground at a low forward speed, but the engine must reach the normal operating speed before the harvest begins, so that the threshing machine runs at full speed. Before the self-propelled harvester enters the ground, the working gear should be selected, and the stepless speed should be reduced to the minimum speed. When the forward speed is increased, try to achieve the stepless speed change, and avoid changing the gear position. When receiving the ground, slowly raise the header and reduce the forward speed and turn, but the throttle should not be reduced to avoid blockage of the barrel.
two. Adjustment of the corn harvester. In the harvesting process, the corn harvester should adjust the threshing gap, the front and rear position and height of the reel, etc. according to the corn yield, dryness and wetness, natural height and lodging condition at any time; and the piggyback harvester Adjustments should be made before entering the ground.
three. Choose a large throttle operation. Corn harvesters should be operated with maximum efficiency. At the time of harvesting, the throttle should always be operated. It is not allowed to reduce the speed of the throttle to reduce the speed of the drum, which will reduce the drum speed, resulting in lower work quality and even block the drum.
four. The choice of job position. During the harvesting process, the corn harvester installed by the tractor should select a reasonable working position according to factors such as wheat yield, natural height, dryness and wetness.
Fives. The choice of the width of the work. Under normal circumstances, the combine harvester should be full of operations, but when the corn production is too high or the humidity is too high, when the minimum operation is still overloaded, the cutting width should be reduced, and the general cutting width can be reduced to 80% to meet the requirements. .
six. Harvest of dry crops. When the corn has matured and passed the suitable harvesting period, it is easy to fall off during harvesting. The speed of the reel should be appropriately lowered to prevent the loss of grain loss caused by the reeling of the reel and reduce the speed of the operation. It can also be arranged in the morning. Or harvest in the evening.
