In order to be able to achieve safe production and improve production efficiency, when using 115 golden star cutting disc, some details of use need to pay special attention. Today, the aurora abrasive tools give you a summary of what details need attention?
1. Please check carefully before installing the cutting piece to confirm whether the cutting piece has deformation, crack, or collapse.
2. In the rotation of the cutting piece, it is strictly forbidden to cut by hand, and the cutting piece cannot be touched by hand or body. Also, if abnormalities are found during the cutting process, stop immediately. Also note that when the cutting piece is marked with the direction of rotation, it must be in the same direction as the machine tool. On the contrary, the cutting is not sharp, and it is difficult to exert the performance of the cutting piece.
3. When the cutting is not sharp, the cutting piece should be trimmed and edged. If it continues to be used, it will cause overheating and overload, and the cutting piece will be damaged. Also, it should be noted that the cutting piece is strictly prohibited for operations other than grooving or cutting, and abnormality due to uneven force is avoided.
4. If a cutting piece that does not match the cut workpiece is used, it is prone to abnormal wear, poor sharpness, abnormal heat, and the like. In addition, it should be noted that when the flange is too small or the precision is poor, the cutting piece is easily damaged. Please use it after improvement.
